ADVANCED  TECHNOLOGY
PORTABLE  EMI  PIPE  Inspection  System

AIR JACKS

ELECTRONICS

DRIVE, HEAD and COIL


The MODEL - 4500 Portable Inspection System provides advanced defect detection
for used Oil Field Drill Pipe and Tubing.

 The MODEL 4500 Portable EMI Pipe Inspection System provides
 the most economical inspection solution for three unique EMI inspection functions.


The MODEL - 4500 is the only three function portable EMI inspection unit in it's category !
 bullet2.gif (311 bytes)         TRANSVERSE FLAWS (for holes / cracks / sharp pits)
 bullet2.gif (311 bytes)         LARGE LOCALIZED WALL LOSS (for erosion / corrosion)
 bullet2.gif (311 bytes)         FULL LENGTH WALL MONITORING (thick-thin display for large area gradual wear)

 


 SYSTEM FEATURES 

bullet2.gif (311 bytes)  Designed to operate from a laptop or desktop style computer system with a USB 2.0 interface.

bullet2.gif (311 bytes)  100% computerized system.  No knobs to turn - ever !

bullet2.gif (311 bytes)  Fast, automatic digital calibration.

bullet2.gif (311 bytes)  Transverse Flaw Detection using induction search coils.

bullet2.gif (311 bytes)  Two wall loss functions implement non-contact solid state Hall sensors.
Non contact design provides a Lower Total Cost of Ownership by eliminating wear and tear !

bullet2.gif (311 bytes)  360 Degree coverage for suspected large area localized wall loss defects such as erosion and corrosion pitting (which is undetectable by the induction search coils).

bullet2.gif (311 bytes)  Includes our "thick-thin" wall loss monitoring function for defects such as OD wear, rod wear and gradual wear (which is undetectable by the induction search coils).

bullet2.gif (311 bytes)  Quick inspection speed.

bullet2.gif (311 bytes)  Engineered to be rugged, extremely easy to use and maintain.

bullet2.gif (311 bytes)  2-3/8" through 6-5/8" O.D. API tubular products can be inspected.

bullet2.gif (311 bytes)  Solid State Meter (S.S.M.) Technology derived from our ARTIS series of products.  The digital meters never need calibration !

bullet2.gif (311 bytes)  ** For a stationary in-plant configuration, see our MODEL 4500 ST unit.

 . . . and much more ! 

 

 

Contact  OEM   if  you  would  like  more  detailed  information  on  this  system !

   Complete color brochures are available via email for these systems.   

 

 

there are known conditions / LIMITATIONS WHICH exist when using Induction search coils FOR the detection of magnetic flux leakage in oil field tubular products.  some of these conditions CAN include, but MAY not BE limited to:  NON-LINEAR OUTPUT, OUTPUT SIGNAL AFFECTED BY THE RATE OF INSPECTION, LOSS OF SENSITIVITY ACROSS THE SURFACE OF THE SEARCH COIL SENSOR, INABILITY TO DETECT CERTAIN TYPES OF DEFECTS AND LOW LEVEL VOLTAGE RESPONSE TO FLUX LEAKAGE (ESPECIALLY WITH RESPECT TO INTERNAL DEFECTS).

 

 This product and/or it's use may be covered by one or more United States Patents.